Lambretta inlet manifold 25/Large block fits rubber mounted 22 - 25mm Dellorto PHBL, Mikuni TMX 24mm, for 200 - 250cc, MB

MRB0050K

We consider the remade 22mm SH carburetors, made by Jetex or Spaco, to be such poor quality that we do not recommend them.

However, the trend is still to keep Lambrettas looking standard so we came across a modern rubber mounted Dellorto that can be used with the standard type Lambretta air boxes.

This manifold will let you fit a 25mm PHBL Dellorto, 24mm Mikuni carburetors onto a 200cc type cast cylinder (200cc Race-Tour, Factory, Rapido, Mugello or Original barrel).

It comes with a stainless steel long bolt to replace the long inlet stud, otherwise it is very hard to fit the manifold without dropping the engine.

One of many Inlet manifolds designed by us MB

It also fits the Mikuni and PWK type carbs.




Lambretta inlet manifold 25/Large block fits rubber mounted 22 - 25mm Dellorto PHBL, Mikuni TMX 24mm, for 200 - 250cc, MB
  • Lambretta inlet manifold 25/Large block fits rubber mounted 22 - 25mm Dellorto PHBL, Mikuni TMX 24mm, for 200 - 250cc, MB
  • Lambretta inlet manifold 25/Large block fits rubber mounted 22 - 25mm Dellorto PHBL, Mikuni TMX 24mm, for 200 - 250cc, MB

£ 30.48
Price: £ 25.40 Ex Vat



Development History

  • Mark Broadhurst has designed and manufactured more inlet manifolds to suit Lambretta scooters than anyone else.
  • Developed over time to suit various carburettors used on Lambrettas for different applications.
  • Designed to clear all frame, engine and body parts.
  • Reshaped to clear panels.

Reasons to Buy

  • Tried and tested.
  • Easy to fit.
  • Fits many carb applications.
  • As used by most dealers around the world for over 20+ years.

Tips

  • Either use an inlet gasket or Silicone sealer to seal the manifold.
  • Match the inlet manifold to inlet port and inlet port to inlet manifold for better results.
  • Tighten inlet screws together.

Reviews ( 1 )

 

4 star 1. Steve 27 Oct 2016 

The manifold itself is excellent quality, despite it looking like it would bolt straight on it fouled one of the cooling fins on the barrel so needed filing down, it would have been nice if the inlet was about 5mm longer but it is now fitted and working great

 
want to offer a review?
Click here

Questions? ( 4 )

Do you have a Question?

If you would like to ask us a question about this product, please feel free to click here to ask a Question Now!



Renaud on 20 Jan 2015 asked "Hello It is said to suit TMX24 do you mean Mikuni TM24? Does it works well in terms of space on a RT for small block Regards Renaud"

MB Scooters Ltd replied: Some call the TMX a TM or the other way round. Yes it fits no problem.

Tam on 06 Nov 2012 asked "Getting a 25mm dellorto for my series 2 with sil 200cc engine. Been recommended this manifold but want to keep panels on do you also sell the rubber air filter hose to fit? Also do you sell a package of jets etc.. to fit the carb for this engine with a GORI 42mm exhaust."

MB Scooters Ltd replied: Yes the rubber is MBL0003 If can check jets used here http://www.lambrettaspares.com/list/Carb-kits-%28Large-block%29.html

Noel on 10 Sep 2012 asked "i have a 25m phbl on my lambretta and when i put the side panel on it push the rubber in stops the air flow if i got one of ur manifolds would that sort it"

MB Scooters Ltd replied: My PHBL manifold is as short as I can make them, we have sold loads over the years with very little complaints BUT frames do alter, one can clear on can touch.

Brett on 06 Feb 2009 asked "I have a question about "Carb inlet manifold 25mm Dell'orto 200 - 250 MRB" Can i use this manifold with a Makuni TM24 carb? also do you take payments via Paypal? thank you"

MB Scooters Ltd replied: Yes this manifold fits the Mikuni TM24, the manifold is used by many dealers who buy them from us.

Sorry we do not take Paypal.



If you feel something is not correct with this product description or image then please contact us using the same link