Lambretta Nut 7mm plain, high tensile thin type for gearbox endplate studs, MB

We recommend using this set of high tensile bolts to secure your gearbox end plate.    Yes, in theory you should use studs in aluminium but... [more]

MB made high tensile thin 7mm nut for gearbox end plate studs. Cemically blacked. 6 required.... [more]

A MB 7mm high tensile spring washer as original used on gearbox end plates. These can come either cemically blacked or Zinc plated. 6 are required... [more]

This is a set of MB 6 high tensile gearbox end plate studs with longer studs (16x8x7.5) The nuts and washers are steel to be stronger.  A complete... [more]

Made for MB Scooters this stepped oversize gearbox end plate stud from 8mm to 7mm has a little more thread for the casing and... [more]

6 x High tensile thin gearbox nuts, MB 6 x Endplate spring washers, MB    ... [more]

This is a set of MB 6 high tensile standard gearbox end plate studs that screw into the casing. The nuts and washers are steel to... [more]

Stepped gearbox end plate repair stud.     Extra long, 8mm x 7mm - 9 x 8 x 20mm.    Drill the casing to... [more]

Stepped gearbox end plate repair stud.   Long, 8 x 1.25mm x 7 x 1mm   Length 9 x 8 x 18mm.  Drill the casing to 6.9mm... [more]

Stepped gearbox end plate repair stud.   Long, 8 x 1.25mm x 7 x 1mm   Length 9 x 8 x 18mm.  Drill the casing to 6.9mm... [more]