Lambretta Air filter box kit, Series 3, bgm

MBGM0466

High flow Series 3 air filter box kit.

Comes with

  • Modified air filter box for improved air flow
  • BGM high flow air filter
  • Long air filter bolt
  • Air filter plate
  • Air box elbow
  • Air box elbow spring clip
  • Air box elbow rubber



Lambretta Air filter box kit, Series 3, bgm
  • Lambretta Air filter box kit, Series 3, bgm
  • Lambretta Air filter box kit, Series 3, bgm
  • Lambretta Air filter box kit, Series 3, bgm
  • Lambretta Air filter box kit, Series 3, bgm

£ 137.78
Price: £ 114.82 Ex Vat



Temporarily out of stock

Notify Me

Related Items (12)

Lambretta Air filter, standard mesh type for increased air flow, Series 3, MB
MBGM0251

New replacement Air Filter from MB Scooters for Series 3 Lambrettas, it uses fine wire mesh to filter the induction air.    It allows... [more]


£ 17.39£ 14.49 (Ex Vat)
Lambretta Air filter (air hose) rubber bellows, Gp125, Series 3, small, Viton, MB
MBL0003

This is a high quality remade air hose for all 18 and 20mm SH type carburettors.   It can also be used on the modern... [more]


£ 8.75£ 7.29 (Ex Vat)
Lambretta Air filter (air hose) rubber bellows, Gp150, 200, large, Viton, MB
MBL0005

This is a high quality remade air hose for all 22mm SH type carburettors.   It can also be used on the modern PHBH type... [more]


£ 8.75£ 7.29 (Ex Vat)
Lambretta Air filter elbow rubber
MBL0625

This rubber fits between the air filter elbow and the air box.... [more]


£ 4.68£ 3.90 (Ex Vat)
Lambretta Air filter box rubber
MBL0626

This rubber fits between the top of the air filter box and the frame.   Please note: This will not fit the BGM box... [more]


£ 2.18£ 1.82 (Ex Vat)
Lambretta Air filter elbow
MBL1025

This is an Indian GP air box elbow.   Ideal if you are putting a scooter back to standard air box specification.   Will fit Series... [more]


£ 16.69£ 13.91 (Ex Vat)
Lambretta Air filter (air hose) bellows clip, small, Li, Sx, Tv, Gp125, stainless steel, MB
MBP0080K

This is a MB remade polished stainless steel air hose clip. Fits the bottom of the air hose bellows rubber when using a standard 18/20mm... [more]


£ 3.74£ 3.12 (Ex Vat)
Lambretta Air filter (air hose) bellows clip, large, Gp150/200, top clip, stainless steel, MB
MBP0081K

This is a MB remade stainless steel air hose clip for the top and bottom of the air hose on all 18/20mm standard carburettor... [more]


£ 3.50£ 2.92 (Ex Vat)
Lambretta Air filter box bottom screw, nut and washer, stainless steel, MB
MBP0098K

This remade screw fits in the small bracket on your Lambretta frame and is used to secure the standard air box.    It is... [more]


£ 4.10£ 3.42 (Ex Vat)
Lambretta Air filter long screw, stainless steel, MB
MBP0108

This bolt is for Series 3 Lambrettas only.    It goes through the air box elbow and the filter and holds them to the air box... [more]


£ 8.54£ 7.12 (Ex Vat)
Lambretta Air filter elbow spring clip, stainless steel, MB
MBP0113

We had this air filter box elbow spring clip remade in stainless spring steel.... [more]


£ 14.14£ 11.78 (Ex Vat)
Lambretta Air filter end plate, stainless steel, MB
MBP0158K

Remade by MB this stainless steel air filter end plate fits all Series 3 air filter boxes. ... [more]


£ 4.51£ 3.76 (Ex Vat)


Tips

To make this work ideally remove the bridge in the air scoop to air air flow

Reviews

there are no customer reviews at present
want to be the first to offer a review?
to place a review click here

Questions? ( 11 )

Do you have a Question?

If you would like to ask us a question about this product, please feel free to click here to ask a Question Now!



Richard B on 27 Aug 2023 asked "Has this Airbox setup been tried with a TS1 225 (left side in1et MMW), PHBH30 & Mbgm bigbox clubman ? Would it work ok or is the airbox to small. "

MB Scooters Ltd replied: I doubt any of that would work, or if it did not very well

Ayden on 23 Aug 2023 asked "Hi, I'm looking to keep my GP as standard as possible so want to use the air box on RT 225 kit, which size Dellorto carb would be best?"

MB Scooters Ltd replied: The only one that fits is the 25mm Dellorto

MR N on 05 Jul 2023 asked "hi all just cant locate the seal between bgm airbox and frame, cant see it in related parts, can only find original fit one, have you a part number please? cheers Nigel"

MB Scooters Ltd replied: Should be this number MBL0626

Stewart h on 13 Aug 2022 asked "Hi where do you get the rubber and screws for the fitting of this as ive already purchased it and cant find the said items on your site ..thanks "

MB Scooters Ltd replied: Go on the product page and the bottom is relative products all the parts are there

David H on 05 Jan 2021 asked "I am considering using this kit on my GP200. It has a SIL 200cc cast iron Stage 4 barrel, Exhaust is a Ancillotti 42mm Clubman, Carb is a Dellorto 25mm PHBL. Can you tell if the air filter elbow is different from the standard GP200 elbow i.e. it is a enlarged/modified item to increase air flow through it. If not is the standard GP200 elbow adequate for my setup. Thanks in advance."

MB Scooters Ltd replied: The 25mm carb uses a different rubber you need this part nunber MBL0003

Roberto B on 29 May 2019 asked "Good Morning , This kit looks just the job for me but could you advise on starting point for jetting please? I have Indian gp 175 kit (don't think it's moded)22mm Jertex with af 42mm clubman. Many thanks"

MB Scooters Ltd replied: We dont specialise in those carbs but up jetting the main jet would be an idea

Roy m on 01 Jun 2018 asked "Do you have or can you get a air box kit in chrome or stainless"

MB Scooters Ltd replied: Sorry they are not made in stainless, but you could chrome one

Paul m on 26 Oct 2017 asked "Hi.I have this kit and I intend using it with an SH2/22 on a GP200 with a clubman exhaust,I use a 125 main jet at the moment will I have to up this and if so,what size do you recomend. Regards,Paul."

MB Scooters Ltd replied: Main jet will vary but you will also need to increase the idle jet to a 52 or 55

Gavin on 07 May 2017 asked "Hi, would this give a better performance with a casa 185 kit and 25mm delly?"

MB Scooters Ltd replied: It lets more air in to breath so can run better

Lee d on 06 Nov 2016 asked "Hi ya how much more air flow is this than a orginal box would you recommend his for your rt195 kit as I've just fitted one "

MB Scooters Ltd replied: Its higher flow with a big neck compared to standard, used with the Bgm hi flow air filter its perfect for the RT kits

Chris on 30 Jan 2015 asked "Hi, nice bit of kit , but dont you sell the air box seperately, as I already have all the other items. Cheers Chris"

MB Scooters Ltd replied: Sorry only comes as a kit.



If you feel something is not correct with this product description or image then please contact us using the same link