Parts index


We stock over 47 Forks

This section contains all items related to Lambretta forks.


Showing parts 1 - 37 of 37

20   |  40   |  ALL   |

Sort by:


Bearing, Lambretta and Vespa fork steering race, top (upper)
MBB0079

A high quality,   European top steering bearing.  Fits all Lambrettas as well as most Vespas.  If you want the best set-up then buy two of these,... [more]


£ 4.12£ 3.43 (Ex Vat)
Bearing, Lambretta and Vespa fork steering race, bottom (lower)
MBB0080

A high quality,   European bottom steering bearing.  Fits all Lambrettas as well as most Vespas.  If you want the best set-up then buy two of these,... [more]


£ 4.12£ 3.43 (Ex Vat)
Nut, half lock, 12 x 1.25mm for Lambretta fork link bolt, stainless steel
MBFHN12XM125

Amongst many applications this fastener can specifically be used on a Lambretta fork link bolt.  It is a different pitch to the nut used on... [more]


£ 1.57£ 1.31 (Ex Vat)
Washer, shake proof, 12mm, internal, stainless steel
MBFSP12

Amongst many applications this fastener can specifically be used on the Lambretta fork link bolt.... [more]


£ 0.19£ 0.16 (Ex Vat)
Fork rods ball bearings, Lambretta Gp, pair
MBL0189PR

This pair of balls sits in the round hole on GP links and Gp fork rod.  You need a pair per set of forks.... [more]


£ 5.18£ 4.32 (Ex Vat)
Headset (handlebar) fork clamp, Lambretta Series 3
MBL0237

This item is bolted to your headset bottom and is then bolted to your forks to hold the headset in place.   It is for... [more]


£ 10.92£ 9.10 (Ex Vat)
Fork steering bearing lower race for Lambretta forks MB
MBL0499

MB UK made lower steering race for the forks.    This race is fitted onto your forks (Series 1, 2, 3)    They often get pitted with rust... [more]


£ 8.05£ 6.71 (Ex Vat)
Fork steering bearing lock ring
MBL0505

This lock ring is the last piece you fit to the upper bearing assembly.  It locks the whole steering bearing set up together.... [more]


£ 3.31£ 2.76 (Ex Vat)
Bearing, Lambretta frame steering lower cup, Indian
MBL0804

This item fits into the bottom of the fork stem on all Series 3 frames.    Sometimes they get pitted by wear or corrosion... [more]


£ 7.64£ 6.37 (Ex Vat)
Fork steering bearing top sleeve, Lambretta Li, Sx, Tv (chrome ring frames)
MBL0884

This item sits inside the chrome ring on your forks and the upper steering bearing sits in it. Remade for MB.... [more]


£ 17.47£ 14.56 (Ex Vat)
Fork damper brackets for the top, weld on type to convert 125/150 forks to 17/200 spec, pair
MBL1067

This is a pair of upper damper brackets to weld onto your Lambretta forks.  There is no precise position to weld them but we would... [more]


£ 7.94£ 6.62 (Ex Vat)
Lambretta Fork link bolt, each, stainless steel, MB
MBP0014

Also available in our extremely popular fork link overhaul kit this is a high quality CNC machined fork link bolt in stainless steel.    They are... [more]


£ 10.87£ 9.06 (Ex Vat)
Lambretta Fork link nylon bush, each, MB
MBP0016

This is a fork link bush remade in hard wearing nylon.    It presses in the fork link and then the steel bush fits inside.    Fork links... [more]


£ 4.03£ 3.36 (Ex Vat)
Lambretta Fork link bolt with half nut and shake proof washer, stainless steel, MB
MBP0019K

This is a stainless steel fork link bolt with a stainless steel half nut and washer.    Another precision MB stainless steel remade product... [more]


£ 12.64£ 10.53 (Ex Vat)
Lambretta Fork spring stops, nylon, double thickness, pair, MB
MRB0039PR

This is a pair of fork spring stops remade in nylon which go up inside your forks.    The fork spring rests on them... [more]


£ 5.06£ 4.22 (Ex Vat)
Lambretta Fork spring stops, nylon, single thickness, pair, MB
MBP0021PR

This is a pair of fork spring stops remade in nylon which go up inside your forks.    The fork spring rests on them... [more]


£ 4.30£ 3.58 (Ex Vat)
Lambretta Fork link bush, each, stainless steel, MB
MBP0029

MB remake these precision fork link bushes in stainless steel for a longer life.    This is the inner bush that goes round the fork link... [more]


£ 4.75£ 3.96 (Ex Vat)
Lambretta Fork link cap, each, 4 required, stainless steel, MB
MBP0030

These caps go between the fork links and the forks on the inside of the forks.    You need 4 per scooter.    They are very prone to... [more]


£ 2.34£ 1.95 (Ex Vat)
Lambretta Fork link damper stud, stainless steel, each, MB
MBP0047

This is the new MB remade disc link damper stud redesigned to straighten up dampers to the forks.    Made in stainless steel.    It is suitable for... [more]


£ 6.08£ 5.07 (Ex Vat)
Lambretta Fork cable spring clip for speedo and front brake cables, stainless steel, MB
MBP0048

We were fed up with the quality of the remade fork cable spring clips we made our own.    This is our MB Stainless steel spring... [more]


£ 5.03£ 4.19 (Ex Vat)
Lambretta Fork steering race protection plate (dust cover) stainless steel, MB
MBP0061

The area where this item fits is very prone to corrosion.    Water gets flicked up by the wheel and things rust.    This item is laser cut... [more]


£ 2.93£ 2.44 (Ex Vat)
Lambretta Fork springs, uprated 3 stage progressive (tightly wound spring to top) pair, MB
MRB0481PR

Normal fork springs work at the same rate on and off no matter what the load is. Old springs go coil bound and weak... [more]


£ 49.10£ 40.92 (Ex Vat)
Fork rods, Lambretta GP and late Sx, pair, stainless steel, MB
MBP0101PR

We were getting sick and tired of the inconsistent quality of GP type fork rods that are available so we decided to have a... [more]


£ 35.98£ 29.98 (Ex Vat)
Lambretta Fork rods, Li, Sx, Tv, pair, stainless steel, MB
MBP0102PR

We were getting sick and tired of the poor quality of Li Sx Tv type fork rods that so we decided to make them... [more]


£ 29.68£ 24.73 (Ex Vat)
Lambretta Fork links, disc type Gp200 type, pair (with nylon bushes) high tensile steel, MB
MRB0650PR

We were so disappointed with the remade Indian and Italian links that we decided to have our own made.    They are made in the UK... [more]


£ 151.58£ 126.32 (Ex Vat)
Lambretta Fork links, drum type with damper stud lugs, uses GP rods, pair, (with nylon bushes) high tensile steel, MB
MRB0763PR

This is another product design by Mark Broadhurst and made exclusively for MB.    Easy to convert your scooter to have drum front hub... [more]


£ 151.58£ 126.32 (Ex Vat)
Fork steering bearing complete kit, Lambretta GP and non chrome ring type frames
MBL0595K

This set contains everything you need to replace the upper and lower steering bearing races on non chrome ring frames.... [more]


£ 77.26£ 64.38 (Ex Vat)
Fork steering bearing complete kit, Lambretta Li, Sx, Tv, chrome ring type
MBL0973K

This set contains everything you need to replace the upper and lower steering bearing races and cups on the frame for Li, Sx or... [more]


£ 86.23£ 71.86 (Ex Vat)
Fork steering bearing kit, Lambretta and Vespa, top and bottom (just the ball bearings) (upper, lower)
MBB0118K

The kit contains the top and bottom steering bearings, ideal for overhauling a scooter where there are signs of bearing wear.   Source from Italy,... [more]


£ 8.23£ 6.86 (Ex Vat)
Fork damper brackets, top, bolt on for Lambretta 125/150 forks, MB
MRB0028K

This is a pair of upper damper brackets, and lower bolt on brackets made by CASA LAMBRETTA  to bolt on to your Lambretta forks.    There... [more]


£ 13.00£ 10.83 (Ex Vat)
Lambretta Fork link total overhaul kit (bolts, nuts, washers, bushes and caps) pair, stainless steel, MB
MRB0031PR

One of our most popular items.    This kit contains 2 fork link bolts 2 fork link bushes 4 fork link caps 2 shake proof washers... [more]


£ 52.20£ 43.50 (Ex Vat)
Repair washer, 6 x 18mm, for Lambretta front dampers, stainless steel
MBFRW6X18

This fastener has universal applications.  It is ideal to use either side of a front damper, it stops the bushes pulling out.... [more]


£ 0.19£ 0.16 (Ex Vat)
Lambretta Fork steering bearing lock washer, stainless steel, MB
MBP0139

Remade MB steering bearing lockwasher which goes between the the lock nut and top steering nut.... [more]


£ 3.16£ 2.63 (Ex Vat)
Fork Buffer Set, Lambretta GP, 2 fat and 2 thin, Push In fork buffers, MB
MBP0379K

Set set of 4 MB GP and late Sx push in fork buffers.    Superior quality to add to all the other parts MB make for Lambretta forks.... [more]


£ 9.22£ 7.68 (Ex Vat)
Cable guide, Titanium
MBU0824

Nice simple quality alloy cable guide in anodised Titanium look. Ideal for using on top fork damper brackets to keep hydraulic and brake cables... [more]


£ 10.84£ 9.03 (Ex Vat)
Fork buffer set (kit) Lambretta Li, Sx, Tv (2 top and 2 bottom buffers, screws and washers) MB
MBP0389S

Complete MB bolt in fork buffer kit to suit all the older Series Lambrettas.    Comes with 2 x large, 2 x small rubber... [more]


£ 23.95£ 19.96 (Ex Vat)
Steering bearing top sleeve, non Chrome ring type Lambretta GP, MB
MBP0412

This MB precision made bearing sleeve (bush) sits in the top of your frame and the top steering bearing sits on it.    Mainly fits GP type... [more]


£ 8.50£ 7.08 (Ex Vat)